Tips for Mounting a Flex-a-lite Fan Controller

Tips for Mounting a Flex-a-lite Fan Controller

Most of the Flex-a-lite electric fans come with either and Adjustable Thermostat Controller our Variable Speed Controller. While we've done a segment on wiring them, one of the common questions we get is where is the best place to mount them? There are a couple of things to consider when choosing a location:

• You will need it to be close enough to the radiator for the temperature probe to reach.
• You want to keep it away from extremely high heat. Typically, on the radiator support or high and forward on an inner fender panel is good.
• You will also want to mount it high in the engine bay to keep it away from road debris and excessive water that can splash up as you drive.
• Finally, they are water resistant, but not waterproof. Do not mount them in a way that allows water to pool up around the terminals.

Flex-a-lite fan controllers are designed to take the place of relays, and offer you the ability to adjust what temperature the fan or fans turn on at, ranging from approximately 160-240 degrees Fahrenheit. We match the proper controller with our fans to accommodate the amp load, and we provide either a fuse or breaker. If you want information about choosing the right controller for your application, check out this article. For more information, visit flex-a-lite.com.